English  |
| Quantity: | |
|---|---|
| Item No. | Photo | Power | Voltage | LEDs | Power Factor | CRI | LM/W |  CCT | Viewing angle | Material | IP | surging protection | Cable | Warranty |
| HIGH BAY |  | 100W | AC100-240V 50~60Hz | SMD2835 | >0.9 | 70/80 | 100LM/W | 3000K 4000K 6000K | 90° | Aluminum die-casting | IP65 | 1KV/2KV | 0.2m H05RN-F3G 0.75mm2 rubber cable | 2 years |
| 150W | AC100-240V 50~60Hz | SMD2835 | >0.9 | 70/80 | 100LM/W | 3000K 4000K 6000K | 90° | Aluminum die-casting | IP65 | 1KV/2KV | 0.2m H05RN-F3G 0.75mm2 rubber cable | 2 years | ||
| 200W | AC100-240V 50~60Hz | SMD2835 | >0.9 | 70/80 | 100LM/W | 3000K 4000K 6000K | 90° | Aluminum die-casting | IP65 | 1KV/2KV | 0.2m H05RN-F3G 0.75mm2 rubber cable | 2 years |
Description
1. Guarantee is for 2 years.
2. The average lifetime of our lamp is at least 25000h.
3. Can pass the IP65 test in our IP testing room.
4. Saving 90% electricity compared to traditional reflector lamp.
5. The die-casting Aluminum body makes these High-bay have good heat dissipation, and can work in an environment of -30℃-45℃.
6. .No flicker,No noise,No electromagnetic interference ( EMI ).
7. Easy Installation.
8. Products IK rate can reach IK08, no need to worry about bad transportation conditions or accidental drops during installation.
| Item No. | Photo | Power | Voltage | LEDs | Power Factor | CRI | LM/W | CCT | Viewing angle | Material | IP | surging protection | Cable | Warranty |
| HIGH BAY | | 100W | AC100-240V 50~60Hz | SMD2835 | >0.9 | 70/80 | 100LM/W | 3000K 4000K 6000K | 90° | Aluminum die-casting | IP65 | 1KV/2KV | 0.2m H05RN-F3G 0.75mm2 rubber cable | 2 years |
| 150W | AC100-240V 50~60Hz | SMD2835 | >0.9 | 70/80 | 100LM/W | 3000K 4000K 6000K | 90° | Aluminum die-casting | IP65 | 1KV/2KV | 0.2m H05RN-F3G 0.75mm2 rubber cable | 2 years | ||
| 200W | AC100-240V 50~60Hz | SMD2835 | >0.9 | 70/80 | 100LM/W | 3000K 4000K 6000K | 90° | Aluminum die-casting | IP65 | 1KV/2KV | 0.2m H05RN-F3G 0.75mm2 rubber cable | 2 years |
Description
1. Guarantee is for 2 years.
2. The average lifetime of our lamp is at least 25000h.
3. Can pass the IP65 test in our IP testing room.
4. Saving 90% electricity compared to traditional reflector lamp.
5. The die-casting Aluminum body makes these High-bay have good heat dissipation, and can work in an environment of -30℃-45℃.
6. .No flicker,No noise,No electromagnetic interference ( EMI ).
7. Easy Installation.
8. Products IK rate can reach IK08, no need to worry about bad transportation conditions or accidental drops during installation.
